Establish the extent of the decorating work
Walk through the rooms and identify each surface included in the enquiry. Walls, ceilings, woodwork and fitted furniture may need different treatments, even when they share a colour. Record whether adjoining rooms remain untouched and where the work should stop. Clear boundaries make the scope easier to understand and expose awkward junctions before materials are selected.
The proposed finish should be discussed with the condition of the existing surface. A retained wall may show historic irregularity that cannot be understood from a small colour sample. We distinguish preparation, local repair and more extensive surface work. This allows the expected result to be considered honestly rather than assuming that every room will behave like newly completed construction.
Investigate the marks that decoration cannot explain
Staining, repeated cracking and loose finishes need an appropriate assessment of their cause. We record where they occur and ask about earlier repairs or changes in the building. The required response may involve another specialist before decorative work proceeds. A fresh surface should follow the necessary investigation and treatment instead of becoming a short-lived cover for an active defect.
Existing coatings also need consideration before a preparation method is chosen. Their composition and condition may be uncertain, particularly on older features. We identify when specialist advice is appropriate and avoid assuming that aggressive removal is harmless. The scope should explain the intended treatment and the material it affects, allowing protection and preparation to be coordinated with the actual room.
Understand the details that will remain
The council's character guidance identifies decorative timber and prominent roof details in parts of Teddington. For external decorating enquiries, those observations prompt an examination of the specific elements involved. They are not a blanket description of every property. We check the relevant building context and identify any consent or conservation advice required before treating a visible change as an ordinary colour choice.
Inside the home, retained mouldings, doors and surrounds should be surveyed directly. The finish needs to respect their condition and the crispness of the detail that remains. We record what will be removed for access, what stays in place and what requires careful protection. This keeps the preparation method connected to the feature, instead of applying one uniform treatment across very different surfaces.
Sources: Richmond: Hampton Wick and Teddington Village Planning Guidance
Develop a colour arrangement across connected spaces
View proposed colours where they will actually be used, alongside floors, upholstery and substantial furniture. A room's orientation and artificial lighting can change the reading of a sample. We encourage comparison on relevant surfaces and at the boundaries between rooms. The decision should account for the view through doorways as well as the appearance of each room on its own.
Finish type also influences the result. Discuss the desired texture and sheen together with practical use and cleaning considerations. A room schedule records the chosen products and where each applies, including ceilings, reveals and woodwork. This avoids ambiguous instructions at corners or transitions and provides a reference when several colours are being coordinated within the same interior.
Plan protection and the interfaces with other work
Furniture, belongings and retained floors need appropriate arrangements before decorating begins. Agree what is moved, what remains and how access through the home will work. Protection must suit both the material and the activity taking place around it. A delicate surface should not become an informal storage or preparation area simply because it lies outside the room currently receiving decoration.
If other refurbishment work is involved, its effect on finished surfaces should be considered. Joinery installation, electrical adjustments and repairs can disturb decoration even when their main work appears complete. We identify the relevant dependencies so the final finish follows a coordinated scope. Where later work is unavoidable, the arrangements and expected treatment of affected areas should remain clear.
Use samples and records to review the result
An agreed sample and a written scope provide different kinds of reference. The sample supports the colour and appearance discussion, while the scope records preparation and extent. Both are useful when reviewing the finished room. If conditions found during preparation require a revised approach, document the change and its implications rather than allowing the final result to depart from expectations without explanation.
Book a feasibility visit with photographs of the rooms, any defects and the furnishings you plan to retain. Share sample ideas and details of connected work. At completion, keep a room-by-room record of finishes and relevant care information. This supports future maintenance and helps identify what was used where, instead of relying on a collection of unlabelled colour names.
Before work begins
Painting & decorating in Teddington: questions
Should a crack be filled before its cause is understood?
The appropriate response depends on its nature and history. We record the condition and identify whether further assessment is needed before decoration. A recurring or unexplained defect should not automatically be treated as a cosmetic blemish, because the preparation method needs to reflect the underlying condition of the surface.
Can the same colour look different in adjoining rooms?
Yes, the room's light and surrounding materials can affect its appearance. Review samples in the intended locations and consider the proposed lighting. Record the exact finish as well as the colour so the approved choice remains clear when several rooms or different surface types are being decorated.
How are retained handles and fittings treated during painting?
The scope should identify which items are removed where appropriate and which are protected in place. Their condition and the surrounding detail influence the approach. Planning those arrangements supports clean edges and avoids relying on later removal of paint from fittings that should have been protected throughout the work.
Is exterior decorating included in the same enquiry?
It can be, but external elements need their own assessment of material, condition, access and any relevant property requirements. Specify the parts you want considered and provide photographs showing their setting. The resulting scope should distinguish exterior repair and preparation from the internal decorating work rather than assume identical treatments.
What should a useful finish schedule contain?
It should identify the room, surface, selected product, colour and finish, together with the relevant preparation and stopping points. Notes about retained or repaired areas can clarify expected transitions. This gives both the household and the decorating team a shared reference and supports later maintenance of the completed rooms.
Official sources
Richmond: Teddington Library · Richmond: Hampton Wick and Teddington Village Planning Guidance
Sources checked on the dates recorded in the source register, most recently 8 November 2026. Maps, list entries and directions must be checked for the individual property and proposed work.
